Product classification: large screen machine series
XBTS series spring arm vibrating screen is a new type of screening equipment, which is widely used in mining, coal, power, metallurgy, building materials, fire resistance and other industries to classify large materials, medium and small granular materials.
Product introduction
XBTS series spring arm vibrating screen is a new type of screening equipment, which is widely used in mining, coal, power, metallurgy, building materials, fire resistance and other industries to classify large materials, medium and small granular materials.
Technical characteristics
XBTS series spring arm vibrating screen is installed at an inclined angle of 20 ° - 35 °. Compared with other similar products, it has the following characteristics:
1. Low price and few spare parts.
2. Simple structure and beautiful appearance.
3. Less energy can save a lot of energy.
4. Large inclination angle, small volume and large screening capacity.
5. Light weight, convenient for installation and process layout.
6. The screening efficiency of the screen is 30% - 40% higher than that of the general screen, which has the self-cleaning function.
Principle and structure
The screen box is driven by two identical vibrating motors or ordinary motors with vibrators to rotate in the opposite direction in a self synchronous manner, so that the whole screen machine supported on the shock absorber can vibrate in a straight line. After the materials fall into the screen from the feeding end, they can quickly move forward, loosen, penetrate and complete the screening operation.
This series of screen machine is composed of screen box, vibration motor (vibrator), vibration damping system and underframe. The screen box is composed of screen frame, screen plate, lining plate, etc.
This series of screen machine uses high-performance, long-life YZO series vibration motor or vibration exciter as the excitation source. The amplitude of the screen machine can be changed by adjusting the excitation force of the vibration source.
The damping system is composed of rubber spring, clamp, support seat, etc. The underframe is composed of material warehouse and underframe. The vibration sources of this series of vibrating screens can be installed in the upper and lower vibration modes, and the shock absorbers can be installed in the seat or hanging mode. It can also be designed and manufactured according to user needs.
Installation and commissioning
1. Fix the channel steel of the underframe on the foundation to make the height of the front and rear support seats on the same side consistent, and the support seat plates on both sides of the same end (feed end or discharge end) are in the same horizontal plane, with the tolerance within 20mm.
2. The static stiffness of the rubber spring has been tested before leaving the factory, and the spring with the same (or similar) stiffness should be selected and configured at different supporting positions of the same shale shaker. During installation, place the rubber spring on the lower support seat, make the boss on the support seat enter the inner hole of the spring, and then lift the screen box, so that the inner hole of the rubber spring is aligned with the boss of the support plate, vertically drop the screen box and place it on the rubber spring. At this time, the height of the rubber spring at each support point should be the same, and the error should not be greater than 2mm
3. When users need to adjust the screen surface inclination, they can loosen the fixing bolts of the clamps, rotate the upper support, raise (or lower) the rear support, and adjust the distance between the front and rear support to make the screen surface inclination meet the requirements.
4. All parts of the screen machine must be firmly and reliably connected, all bolts must not be loose, all parts must not have any abnormal sound, and the small gap between the vibration part on the screen machine and the surrounding fixtures is 30-50mm.
5. When the screen machine leaves the factory, the double amplitude is 5-7mm. The user can adjust the angle between the two eccentric blocks of the vibration motor or vibration exciter, adjust the magnitude of the exciting force, and then adjust the amplitude of the screen machine.
Maintenance and operation
1. Before starting the screen machine, check whether there are obstacles hindering the operation of the screen machine around and whether the connecting bolts are fastened, especially the fixing bolts of the excitation source, support seat and screen plate.
2. Check whether the rotation directions of two vibration motors or vibrators are opposite. If the rotation directions are the same, change the power wiring of one motor to make the rotation directions of two motors opposite.
3. When the screen machine is running, it should be started, operated and stopped once with no load. Observe whether there is any abnormal phenomenon and sound. The screen machine should be stable and normal when it is idling.
4. After 4 hours of continuous operation, measure the bearing temperature, which shall not exceed 75 ºC.
5. After continuous idling for 4 hours, retighten the connecting bolts of each part once, and then repeat for 2-3 times.
6. During the operation with materials, the feeding shall be uniform so that the materials are evenly distributed on the screen surface. If the materials are "deviated", the feeding point shall be adjusted.
7. Before stopping the screen machine, stop feeding, and stop the machine after the materials on the screen surface have gone. After parking, the materials and sundries on the screen surface shall be cleaned in time.
8. The vibration motor or exciter shall be refueled once after 3 months of use, minor repair once every half a year, and major repair once a year, according to the YZO series vibration motor instructions.
technical parameter
Motor type
Vibration exciter type
Applicable industries
Chemical industry: resin powder, pigment, washing powder, micro powder, paint, soda ash, lemon powder, rubber, plastic, etc.
Abrasives, ceramic industry: alumina, quartz sand, mud, sprayed soil particles, etc.
Food industry: sugar, salt, alkali, monosodium glutamate, milk powder, soy milk, yeast, fruit juice, soy sauce, vinegar, etc.
Paper industry: coating paint, clay mud, black and white liquid, waste liquid, papermaking liquid, wastewater recycling, etc.
Metallurgical industry: titanium oxide, zinc oxide, electromagnetic materials, metal powder, electrode powder, etc.
Pharmaceutical industry: Chinese medicine powder, Chinese medicine liquid, Western medicine powder, Western medicine liquid, Chinese and Western medicine granules, etc.
Environmental protection: garbage, human and animal excrement, urine, waste oil, food wastewater, wastewater processing, etc.
Product process
Production workshop
This is our inner workhouse.
some small equipment or parts will be made from here.
There are cranes, laser cutting machines, electric welding machines, platen machines, angle grinders, polishing machines, forklifts, and other equipment.
About transportation
After you place the order and pay the deposit, we will start to arrange the production and contact the ocean freight transportation agency to reserve the position. Two days before the end of production, you need to complete the final payment. Then, we inform the ocean cargo transportation agent company that it is ready to come to the factory to pull the goods to the port. On the day of delivery, we will send the customer the factory video and pictures, and mark the corresponding English name of each product and product parts with a marker to prevent the customer from not knowing what each part is after receiving the goods. At the same time, we will put the English version of the product instructions in the cargo box. We generally select freight forwarders with preferential prices for customers to deliver goods for you. The shipping method can be FOB or CIF. You can also choose EXW, and then contact the goods agent company yourself.
Customer visit
FAQ
1. Who are we?
Our headquarters is located in Henan, China, and our factory was established in 2002. At present, there are more than 100 workers, technical engineers, foreign trade sales personnel, and administrative personnel. The factory covers an area of more than 2000 square kilometers and is mainly engaged in vibrating screening and conveying and feeding equipment.
2. How do we guarantee the quality?
Always provide pre-production samples before mass production; Always carry out a final inspection before shipment.
3. What can you buy from us?
You can purchase a vibrating screen, roller screens, rotary screens, vacuum conveyors, mixers, and customized vibrating machinery and conveying equipment in our factory.
4. What are our strengths?
As one of the old enterprises in the screening industry, Tianfeng has provided a large number of screening equipment and systems at home and abroad. Mass production, rapid delivery, stable quality, affordable price, and excellent after-sales service have become the symbols of Tianfeng.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW, CIP, FCA, CPT, DDP, express;
Accepted payment currency: USD, EUR, RMB;
Type of payment accepted: telegraphic transfer, letter of credit, express remittance, credit card, PayPal, Western Union remittance, cash, custody;
Oral: English, Chinese, French.
6. What information do we need to help you choose a perfect machine?
-Name and characteristics of raw materials.
-Purpose of use: remove impurities, filter, and grade.
-Processing capacity: kg/h, L/h.
-Raw material size: (mesh or mm).
-How many floors do you need?
-Voltage, frequency, phase (single-phase or three-phase) Note: You'd better send us the relevant pictures or materials you want to filter, which can ensure that we recommend the appropriate machine for you.
){kind=link}