New Design Magnetic Vibration Platform
Product introduction: introduction of concrete magnetic vibration table
The concrete magnetic vibration table is widely used in construction engineering, building materials, and scientific research institutions. It is used to vibrate concrete test blocks or other materials. It is safe and reliable. The controller has the functions of manual control and automatic control. The worktable is equipped with an electronic magnetic field. During the test, the magnetic field produced by the test worktable can not move, thus avoiding noise and providing a quiet environment for the laboratory.
Technical characteristics
1. Overall dimension: 800 × 600mm; one thousand × 1000mm
2. Power supply: 380V
3. Disk voltage: 36V
4. Amplitude: 0.5 ± 0.2mm
5. Vibrator power: 1.1 kW
6. Vibration frequency: 2850 times/min
7. Noise test: no more than 80 dB
The Main structure of concrete magnetic vibration table product:
The vibration table is mainly composed of a tabletop, underframe, and vibration motor. The structure is shown in the figure.
Both the table top and the bottom frame are welded steel structures with a certain rigidity. The hard rubber is padded in the middle, which is the vibration-damping support device between the movable table and the fixed underframe. Six locating pins are installed on the upper part of the underframe to match the six locating holes at the bottom of the table to ensure the positioning of the movable table during vibration. The vibration motor fixed at the bottom of the movable table is a two-way shaft motor, which is equipped with the required exciting force at both ends of the shaft to make the vibration table vibrate. Two groups of eccentric blocks are enclosed in the motor shell, which has the advantages of a simple structure and low noise.
Technical Parameter
Operating procedures for concrete magnetic vibration table:
1. Preparation of concrete magnetic vibration table
Before the installation of the concrete vibration table, the foundation shall be laid first. The soil plane of the foundation shall be leveled horizontally, and the bolts of the underframe shall be pressed, and then the installation shall be carried out. The fixing bolts must be tightened during the installation.
After the installation and commissioning of the vibration table, first, drive for 3-5 minutes and then stop to check all the fastening bolts. If they are loose, they must be tightened before use.
2. Concrete magnetic vibration table test operation
In the real process of the concrete vibrating table, the concrete products shall be firmly fastened on the vibrating table, and the required vibrating products shall be placed symmetrically with the table surface, which is load balance.
3. Precautions for concrete magnetic vibration table
The vibrator bearing shall be inspected regularly, and regularly disassembled and cleaned, and the lubricating oil shall be replaced to keep the bearing well lubricated.
The vibration table shall have a reliable grounding wire to ensure safety.
Applicable industries
Chemical industry: resin powder, pigment, washing powder, micro powder, paint, soda ash, lemon powder, rubber, plastic, etc.
Abrasives, ceramic industry: alumina, quartz sand, mud, sprayed soil particles, etc.
Food industry: sugar, salt, alkali, monosodium glutamate, milk powder, soy milk, yeast, fruit juice, soy sauce, vinegar, etc.
Paper industry: coating paint, clay mud, black and white liquid, waste liquid, papermaking liquid, wastewater recycling, etc.
Metallurgical industry: titanium oxide, zinc oxide, electromagnetic materials, metal powder, electrode powder, etc.
Pharmaceutical industry: Chinese medicine powder, Chinese medicine liquid, Western medicine powder, Western medicine liquid, Chinese and Western medicine granules, etc.
Environmental protection: garbage, human and animal excrement, urine, waste oil, food wastewater, wastewater processing, etc.
Maintenance of concrete magnetic vibration table:
1. After the vibration molding is completed, the residual concrete on the table should be cleaned.
2. The vibration motor and suspension bearing shall be regularly filled with lubricating oil.
3. Cut off the power supply after use.
4. The electromagnet should not be energized for a long time, otherwise, the coil is easy to burn.
6, Accessories of concrete magnetic vibration table:
1. Four M16 anchor bolts, M16 nuts, and 16 bevel washers for channel steel.
2. Two vibration-damping rubber cushions.
Processing process
Production Workshop
This is our inner workhouse.
some small equipment or parts will be made from here.
There are cranes, laser cutting machines, electric welding machines, platen machines, angle grinders, polishing machines, forklifts, and other equipment.
Here is our outdoor operation platform.
We often produce and assemble large machines here.
There are electric welding machines, polishing machines, large cranes, and forklifts.
Packaging & Shipping
After you place the order and pay the deposit, we will start to arrange the production and contact the ocean freight transportation agency to reserve the position. Two days before the end of production, you need to complete the final payment. Then, we inform the ocean cargo transportation agent company that it is ready to come to the factory to pull the goods to the port. On the day of delivery, we will send the customer the factory video and pictures, and mark the corresponding English name of each product and product parts with a marker to prevent the customer from not knowing what each part is after receiving the goods. At the same time, we will put the English version of the product instructions in the cargo box. We generally select freight forwarders with preferential prices for customers to deliver goods for you. The shipping method can be FOB or CIF. You can also choose EXW, and then contact the goods agent company yourself.
Customer visit
FAQ
1. Who are we?
Our headquarters is located in Henan, China, and our factory was established in 2002. At present, there are more than 100 workers, technical engineers, foreign trade sales personnel, and administrative personnel. The factory covers an area of more than 2000 square kilometers and is mainly engaged in vibrating screening and conveying and feeding equipment.
2. How do we guarantee quality?
Always provide pre-production samples before mass production; Always carry out a final inspection before shipment.
3. What can you buy from us?
You can purchase a vibrating screen, roller screens, rotary screens, vacuum conveyors, mixers, and customized vibrating machinery and conveying equipment in our factory.
4. What are our strengths?
As one of the old enterprises in the screening industry, Tianfeng has provided a large number of screening equipment and systems at home and abroad. Mass production, rapid delivery, stable quality, affordable price, and excellent after-sales service have become the symbols of Tianfeng.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW, CIP, FCA, CPT, DDP, express;
Accepted payment currency: USD, EUR, RMB;
Type of payment accepted: telegraphic transfer, letter of credit, express remittance, credit card, PayPal, Western Union remittance, cash, custody;
Oral: English, Chinese, French.
6. What information do we need to help you choose a perfect machine?
-Name and characteristics of raw materials.
-Purpose of use: remove impurities, filter, and grade.
-Processing capacity: kg/h, L/h.
-Raw material size: (mesh or mm).
-How many floors do you need?
-Voltage, frequency, phase (single-phase or three-phase) Note: You'd better send us the relevant pictures or materials you want to filter, which can ensure that we recommend the appropriate machine for you.
){kind=link}