Large Capacity Powder and Granular Round Shape Swing Vibrating Screen Machine

• Type: Circular
• Function: High Frequency Vibrating Screen
• Transmission Structure: Eccentric Vibrating Screen
• Usage: Lightweight Fine Shaker
• Works: Spiral Flash Shaker
• Object: Food Processing
• Model NO.: TS
• Shaft Number: Single
• Running Track: Oval Sieve
• Supporting Device: Coil Spring
• Warranty: 1 Year
• Customized: Customized
• Condition: New
• After-sales Service: Perfect After-Sales Service
• Transport Package: Shipping Container/Wooden Case Packaging
• Specification: customized
• Trademark: TFZD
• Origin: Xinxiang, Henan
• HS Code: 8474100000
• Production Capacity: 1000pieces/Year

Product Description

Product Description

 

Large Capacity Powder and Granular Round Shape Swing Vibrating Screen Machine

Product classification: large screen machine series

TDYS series large round vibrating screen is mainly composed of screen box, screen mesh, vibrator and damping spring. The vibrator is installed on the side plate of the screen box and is driven by the motor through the coupling to rotate, generating centrifugal inertial force to force the screen box to vibrate.


Product introduction

TDYS series large round vibrating screen is mainly composed of screen box, screen mesh, vibrator and damping spring. The vibrator is installed on the side plate of the screen box and is driven by the motor through the coupling to rotate, generating centrifugal inertial force to force the screen box to vibrate. The screen mesh of this series of vibrating screen is the main vulnerable part. According to the material variety and user requirements, high manganese steel textile screen mesh, perforated screen plate and rubber screen plate can be used. There are two kinds of screen plates: single-layer and double-layer. All kinds of screen plates can meet the requirements of high screening efficiency, long service life and no blocking. This series of shale shakers are seat mounted, and the screen surface inclination can be adjusted by changing the position and height of the spring support. The motor is installed on the left side of the screen frame and can also be installed on the right side of the screen frame. If there is no special requirement, the manufacturer shall install and supply the motor on the right side of the material movement direction.
 

Main purpose

TDYS series large round vibrating screen is a product developed by our company according to the user's needs and the absorption technology. The moving track of the screen box of this series of round vibrating screen is round, which is suitable for screening coal, limestone, crushed stone, gravel, metal or non-metallic ore and other materials.

Installation and commissioning

1. During installation, steel plates shall be embedded according to the requirements of the equipment drawings. The upper plane of the embedded steel plates shall be on the same horizontal plane. The embedded steel plates and anchor bolts required for installation shall be prepared by the installation department. The supporting spring of each screen machine shall be selected before installation to ensure that the height and stiffness of each spring are basically the same.
2. After leaving the factory, if the installation lasts for more than 6 months, the bearing in the vibrator must be removed and cleaned before installation, and new grease (No. 2 lithium base grease) must be injected. After reinstallation of this series of shale shaker, the eccentric shaft shall be rotated by hand without excessive resistance or jamming, or the causes shall be found out and adjusted in time.
3. After all components are installed and checked as qualified, the test run can be carried out. Before the test run, the bolts at all places shall be checked in detail to see whether they are fastened and whether there are obstacles around the screen machine that hinder the vibration of the screen frame.
4. Test run for 4-6 hours, and observe the operation of the screen machine. In case of abnormal sound or vibration loss, stop the machine in time to check the cause and eliminate the fault. During test run, the following items shall be checked: (1) The temperature of vibrator bearing shall not exceed 75 ºC for high temperature and 45 ºC for temperature rise. (2) The fastening of fastening bolts at all places shall be tightened timely and timely in case of looseness.
5. After the test run is qualified, it can be put into production. Within the first two weeks after the screen machine is put into production, the fastening bolts shall be retightened once a week and then once a month.


Technical Parameter

Applicable industries

       Chemical industry: resin powder, pigment, washing powder, micro powder, paint, soda ash, lemon powder, rubber, plastic, etc.
       Abrasives, ceramic industry: alumina, quartz sand, mud, sprayed soil particles, etc.
       Food industry: sugar, salt, alkali, monosodium glutamate, milk powder, soy milk, yeast, fruit juice, soy sauce, vinegar, etc.
       Paper industry: coating paint, clay mud, black and white liquid, waste liquid, papermaking liquid, wastewater recycling, etc.
       Metallurgical industry: titanium oxide, zinc oxide, electromagnetic materials, metal powder, electrode powder, etc.
       Pharmaceutical industry: Chinese medicine powder, Chinese medicine liquid, Western medicine powder, Western medicine liquid, Chinese and Western medicine granules, etc.
       Environmental protection: garbage, human and animal excrement, and urine, waste oil, food wastewater, wastewater processing, etc.



Product process


Product Workshop



Packaging & Shipping


Company license