Linear shaker using wooden mesh frame features
Wood frame grid is widely used, wood material is divided into three common poplar, red pine, white pine. According to long-term field experience, it is recommended that you choose aspen, its advantages: wooden mesh frame wooden linear screen low cost and convenient maintenance, especially convenient net change, only 3-5 minutes, elasticity is also relatively good.
Linear screen accessories wooden screen frame at the same time screen plate should have enough strength, higher opening rate and not easy to plug holes and other performance. When the linear screen vibrates, the material of different shapes and sizes passes through the sieve plate smoothly under the action of vibration force, and the material is separated to achieve the purpose of classification.
The screen plate of the wooden frame structure is generally used for the straight line screen, it is convenient to replace the screen, but also can add the bouncing ball, increase the penetration rate, effectively prevent the screen plugging, suitable for the screening of powder materials. Wooden screen frame: poplar screen frame, white pine screen frame and red pine screen frame! The former is economical and the latter two cost three times as much!
Wood screen frame is an important part of screening machinery to complete the screening process, each screening machinery should choose a screen plate that conforms to its work requirements. Wooden frame structure of the screen plate, it has the characteristics of relatively low price, light, easy to replace the screen, etc., generally used for DZSF type linear screen. You can also add a bouncing ball, increase the penetration rate, effectively prevent screen clogging, suitable for the screening of powder materials and other advantages.
Linear screen accessories wood screen frame material characteristics, different structure of the screen plate, material and screen machine parameters have a certain impact on the linear screen screening capacity, efficiency, permeability and life, different materials, different places should choose different screen plate, in order to achieve the effect of screening.
So what are the advantages of using wooden mesh for linear vibrating screen? Let's look at the details below
Screening effect advantage: The use of wooden mesh frame does not affect the characteristics of the material, in the screening process does not affect the quality of the material. Due to the characteristics of some materials, the use of iron mesh frame will affect the material characteristics, and wooden mesh frame because of the use of high quality wood, to ensure the material characteristics unchanged, to ensure product quality.
Cost advantage: The linear screen using wooden mesh frame will greatly reduce the manufacturing cost. Compared with the iron frame, the manufacturing cost can be reduced by 10%. For small and medium-sized users, the saving of procurement cost means the increase of gross product;
Maintenance advantage: Wooden grid has a great advantage in the follow-up maintenance. Because of the use of high quality wood production, durable users can rest assured, and subsequent maintenance and replacement is easier. Because of the above advantages, we can consider reserving several sets of mesh frames, and when we need to replace the whole mesh frame directly, we can ensure the efficiency of production.
Above is the advantages of linear vibrating screen wooden mesh frame. In this reminder, wood mesh sieve material is more fine powder, and for some large particles or corrosive material is not applicable, in the purchase of linear vibrating screen must clarify the screening material to the manufacturer, in order to choose more suitable for their own vibrating screen.
Applicable industries
It is divided into dry powder granular type and liquid type.
Chemical sieve: special sieve for resin, pigment, medicine, medicine, cosmetics, fire suppressant, plastic, rubber and other ceramics and refractory materials.
Special screens for ceramic refractory materials: abrasives, abrasives, glass, alumina, ceramic slurry, clay slurry, refractories, quartz sand, titanium powder, powder, etc.
Food specific screen: sugar, monosodium glutamate, salt, fruit juice, starch, milk powder, grain, soybean milk, egg powder, various protein powder, etc.
Metallurgical special screen: ore, titanium oxide, zinc oxide, casting sand, metallurgical powder superhard alloy, electromagnetic materials, aluminum powder, various metal particles, etc.
Others: carbon black, carbon, cosolvent, activated carbon, wood powder pearl, etc.
Liquid special screen: paint, paint, and viscous liquid.
Technical parameters of linear vibrating screen
Guidance on use and maintenance of linear vibrating screen
1. The machine shall be equipped with electrical protection device.
2. At the initial operation stage of the machine, the anchor bolts shall be checked at least once a day to prevent looseness.
3. When the motor rotation direction does not meet the requirements, adjust the power supply phase sequence.
4. The motor shall be well lubricated, and lithium base grease (ZL-3) shall be added once every two weeks of operation. When refueling, an appropriate amount of lithium base grease shall be added through the oil cup. When sealed bearings are used, the motor is not equipped with oil cups.
5. After the machine has been running for 1500 hours, check the bearing and replace it immediately in case of serious damage.
6. When the machine is used again after being stopped for a long time, the insulation resistance should be measured, which should be greater than 0.5 megohm for 500 volt megger measurement.
Daily maintenance of linear vibrating screen
1. Before starting:
(1) Check whether the coarse mesh and fine mesh are damaged;
(2) Check whether the transportation support is removed.
2. At startup:
(1) Pay attention to whether there is abnormal noise;
(2) Whether the current is stable;
(3) Whether the vibration is abnormal.
3. After use: clean up after each use.
Regular maintenance of linear vibrating screen
Regularly check the coarse screen, fine screen and spring for fatigue and damage, and check whether all parts of the machine body are damaged due to vibration. The parts that need to be lubricated must be lubricated.
Product process
Production workshop
About transportation
After you place the order and pay the deposit, we will start to arrange the production and contact the ocean freight transportation agency to reserve the position. Two days before the end of production, you need to complete the final payment. Then, we inform the ocean cargo transportation agent company that it is ready to come to the factory to pull the goods to the port. On the day of delivery, we will send the customer the factory video and pictures, and mark the corresponding English name of each product and product parts with a marker to prevent the customer from not knowing what each part is after receiving the goods. At the same time, we will put the English version of the product instructions in the cargo box. We generally select freight forwarders with preferential prices for customers to deliver goods for you. The shipping method can be FOB or CIF. You can also choose EXW, and then contact the goods agent company yourself.
Customer visit
Company profile
FAQ
1. Who are we?
Our headquarters is located in Henan, China, and our factory was established in 2002. At present, there are more than 100 workers, technical engineers, foreign trade sales personnel, and administrative personnel. The factory covers an area of more than 2000 square kilometers and is mainly engaged in vibrating screening and conveying and feeding equipment.
2. How do we guarantee the quality?
Always provide pre-production samples before mass production; Always carry out a final inspection before shipment.
3. What can you buy from us?
You can purchase a vibrating screen, roller screens, rotary screens, vacuum conveyors, mixers, and customized vibrating machinery and conveying equipment in our factory.
4. What are our strengths?
As one of the old enterprises in the screening industry, Tianfeng has provided many screening equipment and systems at home and abroad. Mass production, rapid delivery, stable quality, affordable price, and excellent after-sales service have become the symbols of Tianfeng.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW, CIP, FCA, CPT, DDP, express;
Accepted payment currency: USD, EUR, RMB;
Type of payment accepted: telegraphic transfer, letter of credit, express remittance, credit card, PayPal, Western Union remittance, cash, custody;
Oral: English, Chinese, French.
6. What information do we need to help you choose a perfect machine?
-Name and characteristics of raw materials.
-Purpose of use: remove impurities, filter, and grade.
-Processing capacity: kg/h, L/h.
-Raw material size: (mesh or mm).
-How many floors do you need?
-Voltage, frequency, phase (single-phase or three-phase) Note: You'd better send us the relevant pictures or materials you want to filter, which can ensure that we recommend the appropriate machine for you.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}