The Temperature Around The Shale Shaker Is High Fill in Coolant

Product Description

The Temperature Around The Shale Shaker Is high Fill In Coolant

The vibrating screen can only be screened by the vibration generated by the vibration exciter. For the vibrating screen working in the workshop or outdoors, the working environment temperature also has certain requirements. If the temperature is too high, it will cause certain damage to the vibrating screen, affect the service life of the vibrating screen, and delay the production. Generally speaking, the working environment temperature of the vibrating screen is not more than 40 ºC. If it exceeds the temperature, it will require certain cooling measures, How to reduce the high temperature around the vibrating screen?
How to reduce the high temperature around the vibrating screen
1. Fill in coolant
When adding coolant to the vibrating screen, try to add the same type of coolant as the water radiator. Do not add tap water at will, unless it is for emergency treatment. When adding cooling water to the water radiator, be sure to wait until the water temperature drops to about 70 ºC; The "gradual water injection method" should be adopted to gradually reduce the temperature, instead of adding water too fast or too fast at one time, that is, when adding water, the engine should be allowed to run at idle speed while filling slowly, so as to ensure the safety of operators and equipment.


2. Build sunscreen screen
When working outside the vibrating screening equipment, attention should be paid to building sunscreen or awning. A long time of exposure to the sun will not only make the machine old and aging, but also make the whole machine of the vibrating screen equipment too high temperature to work properly, affecting the efficiency and quality of screening, and seriously will also cause damage to the vibrating screen components such as the vibrating motor. For vibrating screening equipment working indoors or in mines, attention should be paid to the adjustment of indoor temperature, ventilation and permeability.
3. Do a good job of lubrication
Lubrication is for the bearings of the vibrating screen. Lubrication plays an important role in the transmission of the vibrating screen and in the maintenance of the equipment. Lubrication can affect the performance, accuracy and service life of the equipment. In the high temperature season, the lubrication time should be adjusted first, which is 0.5-1 times shorter than that in spring and autumn, and the oil quality should be kept under observation. The temperature of lipid oil is easy to change. If the temperature rises, add oil properly. If the temperature is slightly higher after adding oil, it will fall down slowly, which proves that the lubrication is effective. The oil quantity inside the bearing is not enough, which leads to the failure of lubrication and the rise of temperature. If the temperature does not change or only rises and does not drop after refueling, it is proved that the bearing has been worn, or is seriously short of oil, or even the oil inside is dry.
The above is the answer about how to reduce the high temperature around the shale shaker. We can fill in coolant, build a sunscreen for the shale shaker working outdoors, and do a good job of equipment lubrication. Whether indoors or outdoors, we should keep a good working environment for the shale shaker, and try to avoid using the shale shaker equipment in high temperature environment. If we can't avoid it, we should take some cooling measures for it.
Product Category: Fine Screening Series

TS series ultrasonic vibrating screen can screen heavy, light, fine, and strong adsorption powders that cannot be separated by ordinary screening machines and can solve many difficult-to-screen powders.
 

Overview of ultrasonic vibrating screen

       The ultrasonic vibrating screen is an ordinary rotary vibrating screen with an ultrasonic mesh frame, which converts the ultrasonic waves into high-frequency mechanical waves through an ultrasonic power source and an ultrasonic transducer, and transmits them to the screen surface to achieve good screening purposes.

      The ultrasonic vibrating screen can solve the heavy, light, fine, and strong adsorption powder that cannot be separated by ordinary screening machines. The ultrasonic vibration wave (mechanical wave) attached to the screen can make the fine powder accept the ultrasonic acceleration and improve the low-density powder. Gravity settlement (light contact between the powder and the mesh port), slip effect, improve the retention or wedging of high-density metal at the mesh port, and improve the adhesion effect of electrostatic powder, thereby improving screening efficiency and screening. quality. Expressed by the sieving pass rate, in general, the pass rate is increased by 50%-400% compared with no ultrasonic vibrating screen.

Structure diagram of ultrasonic vibrating screen


Experiment comparison between ultrasonic vibrating screen and ordinary vibrating screen

Compared with ordinary vibrating screen, the ultrasonic vibrating screen has the following technical advantages

      1. Screening capacity and higher screening accuracy, to achieve high-precision screening, the accuracy can be increased by 1-70%, and the output can be increased by 0.5-10 times.
      2. It can prevent the screen from clogging, and the materials that are difficult to screen will hardly block the mesh. Capable of controlling a narrow particle size range.
      3. It can solve the screening problems of materials with strong adsorption, easy agglomeration, high static electricity, and light-specific gravity.
      4. The characteristics of the screened materials remain unchanged.
      5. Digital signal input to realize automatic frequency tracking.
      6. The energy conversion efficiency of the transducer is high (reaching the standard of foreign counterparts).
      7. Continuous work for 24 hours, control power supply and transducer do not need to cool down.
      8. The transducer and the screen are connected by screws, which are easy to disassemble and clean.
      9. Separate structure, with resonance ring, good effect, and long life of the screen.
      10. It can sieve 25μ blue powder and 10μ blue liquid.
      11. There is no need for rubber balls to clean the net, and there is no recontamination caused by rubber wear.
      12. Adhesive screen fixed mesh frame, no dead angle, uniform force, easy to replace.

Expanded use of ultrasound systems

      Use the same ultrasonic power supply to connect a net-cleaning transducer, and use the radiating surface of the ultrasonic transducer to contact the blocked net surface, and the relative displacement can clear the blockage of the net port. It has the advantages of rapidly improving the quality of cleaning, without changing the size of the mesh opening, and without harming the surface quality of the wire mesh, and can be widely used in test sieves and working sieves.

Ultrasonic vibrating screen industry application

      Silicon carbide, brown corundum, white corundum, molybdenum powder, tungsten powder, cobalt powder, nickel powder, stainless steel powder, alloy powder, powder coating, quartz powder, diamond powder, electromagnetic powder, laser powder, aluminum powder, electrolytic copper powder, grinding Powder, refractory materials, luminous powder, glass beads, rubber additives, powdered sugar, starch, salt, soy milk powder, API intermediates and other materials that are not easy to be screened by ordinary sieves.
 
Real photo of ultrasonic vibrating screen workshop


Ultrasonic vibrating screen power box

Ultrasonic vibrating screen frame

Shipment and transportation

After you place the order and pay the deposit, we will start to arrange the production and contact the ocean freight transportation agency to reserve the position. Two days before the end of production, we informed the ocean cargo transportation agency that it was ready to pull the goods to the port. On the day of delivery, we will send the customer the factory video and pictures, and mark the corresponding English name of each product and product parts with a marker to prevent the customer from not knowing what each part is after receiving the goods. Then, it is sealed in wooden cases. At the same time, we will put the English version of the product instructions in the cargo box. We generally select freight forwarders with preferential prices for customers to deliver goods for you. The shipping method can be FOB or CIF. You can also choose EXW, and then contact the goods agent company yourself.

FAQ
1. Who are we?
Our headquarters is located in Henan, China, and our factory was established in 2002. At present, there are more than 100 workers, technical engineers, foreign trade sales personnel, and administrative personnel. The factory covers an area of more than 2000 square kilometers and is mainly engaged in vibrating screening and conveying and feeding equipment.
2. How do we guarantee the quality?
Always provide pre-production samples before mass production; Always carry out a final inspection before shipment.
3. What can you buy from us?
You can purchase a vibrating screen, roller screens, rotary screen, vacuum conveyor, mixer, and customized vibrating machinery and conveying equipment in our factory.
4. What are our strengths?
As one of the old enterprises in the screening industry, Tianfeng has provided a large number of screening equipment and systems at home and abroad. Mass production, rapid delivery, stable quality, affordable price, and excellent after-sales service have become the symbols of Tianfeng.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW, CIP, FCA, CPT, DDP, express;
Accepted payment currency: USD, EUR, RMB;
Type of payment accepted: telegraphic transfer, letter of credit, express remittance, credit card, PayPal, Western Union remittance, cash, custody;
Oral: English, Chinese, French.
6. What information do we need to help you choose a perfect machine?
-Name and characteristics of raw materials.
-Purpose of use: remove impurities, filter, and grade.
-Processing capacity: kg/h, L/h.
-Raw material size: (mesh or mm).
-How many floors do you need?
-Voltage, frequency, phase (single-phase or three-phase) Note: You'd better send us the relevant pictures or materials you want to filter, which can ensure that we recommend the appropriate machine for you.