Bean Powder Vibrating Screen, Cyclone Dewatering Screen Sieve Separator
Product classification: fine screening series
TS series cyclone screen is a high-precision screening equipment for fine powder screening. It can continuously screen powdery materials with a fineness range of 80-500 meshes. The screen can be replaced at will.
Brief introduction of cyclone screen
TS series cyclone screen is a high-precision screening equipment for fine powder screening. It can continuously screen powdery materials with a fineness range of 80-500 meshes. The screen can be replaced at will. High screening efficiency, large output, fineness, no oversize mixing phenomenon, no load on the vertical screen, long service life, wide range of fineness, totally enclosed structure, no dust spillage, low noise and energy consumption, continuous operation and convenient maintenance.
Working principle of cyclone screen
Theoretically, TS series cyclone screen is a new way of screening concept that discards the traditional principle of gravity potential energy operation and carries fluid kinetic energy to do work. It uses high-speed airflow as the carrier under closed state, so that fully diffused powder particles can be sprayed to the screen with enough kinetic energy to achieve rapid classification.
Structure diagram of cyclone screen
Technical characteristics
1. It can be used with single machine or multiple machines, and can run continuously for a long time and reliably.
2. New type outer spherical bearing extends service life.
3. It has the function of re crushing caked materials.
4. The screen is washed by the cyclone and can be cleaned automatically.
5. It can be specially designed to meet special requirements.
Applicable industries
TS series cyclone screen is widely used in all kinds of fine powders that are difficult to screen. Fine powders in the range of 50-500 meshes can be well screened. Such as light calcium powder, active calcium powder, active carbon powder, starch, traditional Chinese medicine powder, fly ash, zinc powder, graphite powder, quartz sand powder, gold powder, clay powder, hawthorn powder, fruit powder, calcium hydroxide powder, pesticide powder, konjac powder, fluorescent powder, wood powder, flour, epoxy resin powder, manganese dioxide, sulfur powder, aluminum oxide powder, bakelite powder, magnesium oxide, perlite powder, iron powder, cotton linter, etc.
Technical parameter
Maintenance of cyclone screen
1. Maintenance
(1) When using the equipment for the first time, the operator shall carefully read the operation manual, use the equipment correctly in strict accordance with the requirements of the product operation manual, and do a good job in cleaning, lubrication, fastening, corrosion prevention and other daily maintenance of the equipment, so that the equipment is always kept clean inside and outside, in good performance and reliable condition.
(2) Regularly check whether the grounding wire is in good condition and whether the cable connecting the equipment to the power switch is in good condition. If it is aged, replace it in time.
(3) The main machine, motor and fan of the cyclone screen shall be overhauled once a year, and an appropriate amount of lubricating oil shall be added regularly to remove the dust in the motor. The vibration exciter of screen machine equipped with vibration exciter must be maintained once or twice a year, with lubricating oil added for each maintenance, and the connecting bolts tightened.
(4) The electrical control box of the cyclone screen shall be kept clean to prevent dust from falling into the control box, causing failure or short circuit of electrical components.
(5) The screen mesh shall be evenly tensioned during replacement. When fixing the wire ropes at both ends, the screen mesh shall be adjusted while tightening.
2. Common faults and troubleshooting
(1) When the processing capacity fails to meet the requirements, the inspection screen shall be used to detect whether the materials meet the screening requirements.
(2) When the handling capacity suddenly increases, the finished product shall be taken for inspection and analysis. If the finished product is unqualified, the screen mesh shall be checked for integrity.
(3) No discharging occurs suddenly during operation.
a. Check whether the fan is normal. If the flow of the fan decreases, repair the fan.
b. Check whether the discharge auger cannot rotate and discharge.
3. Precautions
(1) This machine is not suitable for screening materials with viscosity and water content greater than 5%, as well as flammable and explosive materials.
(2) With the same model of air flow screening machine, the larger the mesh size of screened materials, the lower the output
(3) The following items shall be stated when ordering:
a. Name and bulk specific gravity of materials to be screened.
B. Material particle size and water content.
c. Number of sieve mesh.
d. Processing output of the screen machine.
About Transportation
After you place the order and pay the deposit, we will start to arrange the production and contact the ocean freight transportation agency to reserve the position. Two days before the end of production, you need to complete the final payment. Then, we inform the ocean cargo transportation agent company that it is ready to come to the factory to pull the goods to the port. On the day of delivery, we will send the customer the factory video and pictures, and mark the corresponding English name of each product and product parts with a marker to prevent the customer from not knowing what each part is after receiving the goods. At the same time, we will put the English version of the product instructions in the cargo box. We generally select freight forwarders with preferential prices for customers to deliver goods for you. The shipping method can be FOB or CIF. You can also choose EXW, and then contact the goods agent company yourself.
Certifications
FAQ
1. Who are we?
Our headquarters is located in Henan, China, and our factory was established in 2002. At present, there are more than 100 workers, technical engineers, foreign trade sales personnel, and administrative personnel. The factory covers an area of more than 2000 square kilometers and is mainly engaged in vibrating screening and conveying and feeding equipment.
2. How do we guarantee the quality?
Always provide pre-production samples before mass production; Always carry out a final inspection before shipment.
3. What can you buy from us?
You can purchase a vibrating screen, roller screens, rotary screens, vacuum conveyors, mixer, and customized vibrating machinery and conveying equipment in our factory.
4. What are our strengths?
As one of the old enterprises in the screening industry, Tianfeng has provided a large number of screening equipment and systems at home and abroad. Mass production, rapid delivery, stable quality, affordable price, and excellent after-sales service have become the symbols of Tianfeng.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW, CIP, FCA, CPT, DDP, express;
Accepted payment currency: USD, EUR, RMB;
Type of payment accepted: telegraphic transfer, letter of credit, express remittance, credit card, PayPal, Western Union remittance, cash, custody;
Oral: English, Chinese, French.
6. What information do we need to help you choose a perfect machine?
-Name and characteristics of raw materials.
-Purpose of use: remove impurities, filter, and grade.
-Processing capacity: kg/h, L/h.
-Raw material size: (mesh or mm).
-How many floors do you need?
-Voltage, frequency, phase (single-phase or three-phase) Note: You'd better send us the relevant pictures or materials you want to filter, which can ensure that we recommend the appropriate machine for you.
){kind=link}