After-sales Service: | Online Video Guidance |
---|---|
Warranty: | 1 Year |
Type: | Electromagnetic Vibrating Feeder |
Movement Mode: | Reciprocating |
Usage: | Mine, Gravel Field, Metallurgy, Building Materials, Chemical Industry, Ore-dressing, Colliery |
Appearance: | Open-Type |
Customization: |
---|
Suppliers with verified business licenses
Serial number | Fault phenomenon | Failure cause | Exclusion method |
1 | After the power supply is turned on, The feeder does not start |
1. The power line is disconnected 2. Motor jamming 3. Overload 4. Constraint with other equipment at the connection |
1. Check whether the three-phase power supply is cut off and the voltage is consistent with the label 2. Open the motor bracket to eliminate jamming 3. Light load start 4. Exclude connections to other devices |
II | After vibration, the amplitude is small and the material swings transversely, and the material deviates | 1. Two vibration motors run in the same direction 2. One of the two vibration motors does not work or operates in one direction |
1. Replace any two-phase connection of a vibration motor to ensure the reverse operation of the two vibration motors 2. If one of the vibration motors is damaged, it should be removed and replaced quickly |
III | Excessive temperature rise of vibration motor | 1. Bearing heating 2. Single-phase operation 3. Rotor bore sweeping |
1 Adjust or replace bearings 2. Deal with broken phase 3. Disassemble and assemble the motor and troubleshoot it |
IV | Current increase | 1. One of the two vibration motors works 2. Overload 3. Bearing jamming or lack of lubricant |
1 Repair motor and wiring 2. Reduce the thickness of material layer 3 Replace bearings with lubricant |
V | Loud noise | Loose or broken base bolt of vibration motor |
Fastener bolts are fastened or replaced |
Suppliers with verified business licenses