Stainless steel Rectangular Vibrating Separator sifter Linear Vibrating Screen For silicone sand soil
According to the form of the installation part of the linear vibrating screen cylinder, it can be divided into removable and fixed cylinders. According to the installation form of linear vibrating screen cylinder, it can be divided into fixed type, swing type, embedded type and rotary type cylinder.
1) Before installing the linear vibrating screen cylinder, the test shall be conducted under the no-load test and pressure test of 1.5 times of the larger working pressure. It can be used after normal operation without air leakage.
2) Before connecting the linear vibrating screen cylinder with the pipeline, Qingdao shot blasting machine needs to clean the dirt in the pipeline to prevent debris from entering the cylinder.
3) When the load changes in the stroke, use a cylinder with sufficient output force and buffer.
4) Before starting the operation of the buffer linear vibrating screen barrel, the shot blasting machine first turns the buffer throttling mixer to the small position of the throttle valve, and then gradually enlarges it until it is adjusted to a satisfactory buffer effect.
5) Do not use the full stroke, especially when the piston rod is extended, do not use the cylinder head to contact the piston rod. Otherwise, it is easy to cause the load concentration at the piston rod and external joint.
6) The installation form of linear vibrating screen barrel shall be determined according to the installation position, the use of red rocket and the use of red rose. Usually, fixed cylinders are used. When it is necessary to use a working mechanism (such as lathe, grinder, etc.) for continuous rotation, a rotating cylinder shall be used.
In case of special requirements, corresponding special cylinders shall be selected. The working principle of double-piston rotary cylinder is divided into positive action and reaction. The positive action is K. intake, the piston drives the piston rod backward, and the input force clamps the clamping mechanism. The reaction type is Kz intake, the piston drives the piston rod forward, and the input force releases the clamping mechanism.
){kind=link}